 
|
NVIDIA ConnectX-8 SuperNIC C8180-DT0 800G High-Density AI Fabric for Large-Scale GPU Clusters
제품 상세 정보:
| 브랜드 이름: | Mellanox |
| 모델 번호: | C8180 (900-9X81E-00EX-DT0) |
| 문서: | connectx-datasheet-connectx...1).pdf |
결제 및 배송 조건:
| 최소 주문 수량: | 1개 |
|---|---|
| 가격: | Negotiate |
| 포장 세부 사항: | 외부 상자 |
| 배달 시간: | 목록을 기반으로 |
| 지불 조건: | 티/티 |
| 공급 능력: | 프로젝트/배치 별 공급 |
|
상세 정보 |
|||
| 모델 번호.: | C8180 (900-9X81E-00EX-DT0) | 전송 속도: | 400gbe |
|---|---|---|---|
| 포트: | 이중 포트 | 기능: | LACP, 스택 가능, VLAN 지원 |
| 기술: | 인피니본 | 호스트 인터페이스: | gen6 x16 |
| 인터페이스 유형: | QSFP112 | 등록 상표: | Mellanox |
| 강조하다: | NVIDIA ConnectX-8 SuperNIC 800G,High-Density AI Fabric network card,GPU cluster network card with warranty |
||
제품 설명
NVIDIA ConnectX-8 SuperNIC C8180-DT0 800G High-Density AI Fabric
Model: 900-9X81E-00EX-DT0 | Multi-Host | High Density | AI Factory Optimized
The DT0 (Density / Hyperscale) variant is engineered for AI factories operating 10,000+ GPUs. Features NVIDIA Multi-Host technology (up to 4 hosts per adapter), advanced power management (under 28W typical), and telemetry-based congestion control for predictable large-scale performance.
Product Overview - Hyperscale Edition
NVIDIA ConnectX-8 SuperNIC C8180-DT (900-9X81E-00EX-DT0) is purpose-built for hyperscale AI operators. Unlike standard enterprise SKUs, the DT0 variant includes Multi-Host PCIe capabilities allowing a single adapter to serve up to four independent host processors — reducing NIC count per rack and lowering total cost of ownership. Enhanced telemetry and programmable congestion control ensure consistent tail latency across thousands of GPU nodes.
Hyperscale Advantages
- 4:1 Multi-Host consolidation (4 hosts per NIC)
- <28W typical power at full 800G load
- Advanced telemetry: per-flow latency, queue depth, ECN marking
- Adaptive routing support for load-balanced fabrics
- SHARPv3 in-network reduction for collective operations
Scalability Metrics
- Supports AI clusters of 100,000+ GPUs
- 16 million I/O channels per adapter
- Up to 8 logical ports via splitter cables
- Zero packet loss at line rate (PFC + ECN)
- RDMA over Converged Ethernet v2 (RoCEv2)
Multi-Host Architecture
| Configuration | Hosts Supported | Total Bandwidth per Host | Use Case |
|---|---|---|---|
| 1 Host | 1 | 800Gb/s | Maximum single-host throughput |
| 2 Hosts | 2 | 400Gb/s each | Balanced dual-node density |
| 4 Hosts | 4 | 200Gb/s each | Maximum rack density |
Target Deployments - Hyperscale AI Factories
- Large language model training clusters (GPT-5 scale)
- Autonomous vehicle training infrastructure
- Cloud provider GPU-as-a-service platforms
- National supercomputing centers
- AI semiconductor design simulation farms
Power & Thermal Optimization
The DT0 variant features enhanced power gating and dynamic voltage scaling, achieving 25-28W typical at 800Gb/s line rate — 15% more efficient than previous generation. Passive cooling sufficient for 1U servers with adequate front-to-back airflow.
Hong Kong Starsurge Group Co., Limited
As a specialized networking hardware provider since 2008, Starsurge serves hyperscale clients across APAC, North America, and Europe. For C8180-DT bulk procurement (500+ units), contact our hyperscale team for custom pricing and logistics.
이 제품에 대한 자세한 내용을 알고 싶습니다